Noise Cut Transformer NCT-N
This is a model that can accommodate limited installation environments.
It is a slim model.
- Company：電研精機研究所
- Price：Other
Noise Cut Transformer(nct) - List of Manufacturers, Suppliers, Companies and Products
Noise Cut Transformer Product List
1～15 item / All 17 items
Displayed results
Noise Cut Transformer NCT-F5/F6
This is a cost-performance model suitable for embedded systems.
The NCT-F5 and F6 models are low-cost types that pursue cost performance. They are suitable for situations where appearance is not a concern, such as when integrated into the cabinet of the equipment being installed. By keeping the price down, we have successfully added new know-how to ensure that performance does not decline, resulting in good characteristics.
- Company：電研精機研究所
- Price：Other
Noise Cut Transformer NCT-G
We have received high praise from cutting-edge research institutions, starting with the field of nuclear physics.
The coil's positioning is structured in an eccentric axis and eccentric core format, making it particularly effective in high-frequency areas and suitable for achieving high prevention effects. Compared to the NCT-F series, a higher attenuation rate can be achieved. It is designed faithfully to the principles of noise prevention, featuring a triple shielding body and a robust, low-impedance outer casing, constructed with shapes and materials that shield all conductive parts, including terminals and lead wires.
- Company：電研精機研究所
- Price：Other
Noise Cut Transformer NCT-F1
It is the most basic and proven long-selling model.
It has a coaxial and different core structure, is suitable for mass production, and is a relatively inexpensive basic model, but it has a significantly high noise attenuation rate among noise prevention products. Additionally, it is designed in a shape that faithfully adheres to the principles of noise prevention, equipped with triple shielding, housed in a sturdy and low-impedance outer casing, and possesses the quality to shield all conductive parts, including terminals and lead wires. Compared to the NCT-G type, it is slightly superior in efficiency and voltage fluctuation rate.
- Company：電研精機研究所
- Price：Other
Noise Cut Transformer NCT-J
Decisive effect against noise leakage from inverters! It can also be widely used for other three-phase applications.
This is a "Noise Cut Transformer" developed to prevent malfunctions and communication disruptions caused by noise associated with the rapidly increasing use of "general-purpose inverters." Of course, it can also be used for other applications. The noise generated by conventional inverters has been difficult to sufficiently mitigate with LC filters and similar devices. This is due to the presence of a significant amount of noise in the frequency range below 100 kHz, where the effectiveness of the filters diminishes, as well as issues such as leakage current when filters are used, and the influence of grounding conditions and the impedance of power and load devices. The NCT-J is a trump card that can solve these problems all at once.
- Company：電研精機研究所
- Price：Other
Noise Cut Transformer NCT-F3/F4
Both input and output can switch between 100V and 200V.
For example, when used externally alongside your equipment, such as being combined with medical devices and placed in a consultation room, care has been taken with the appearance to ensure that it does not compromise the high-quality image of the entire room. Additionally, to facilitate easy installation and wiring, we have prepared two shapes to choose from—vertical (F3 type) and horizontal (F4 type)—to suit your installation space and aesthetic preferences.
- Company：電研精機研究所
- Price：Other
Noise Cut Transformer NCT-K
It is equipped with strict lightning protection and surge prevention.
The lightning surge that intrudes into the power line and reaches one coil of the lightning protection transformer first attempts to transfer electrostatically (through capacitive coupling) to the other coil. However, if the transformer has a shielding plate, this can be effectively prevented. Following that, a slower electromagnetic transfer (through inductive coupling) occurs, and there has been no lightning protection transformer equipped with a structure to prevent this; they have relied on added capacitors and varistors, which have been insufficient to protect low-resistance information devices and precision electronic equipment. However, a structure like the "Noise Cut Transformer" that prevents high-frequency magnetic flux from the lightning surge from crossing to the secondary side can also prevent this electromagnetic transfer. The NCT-K type takes advantage of this characteristic, featuring high voltage insulation that withstands the impact of lightning surges, excellent shielding with a very low impedance triple structure, and is designed and manufactured to easily divert powerful lightning surges to the ground, almost completely preventing them from escaping to the load side, making it a "Noise Cut Transformer for lightning protection."
- Company：電研精機研究所
- Price：Other
Noise Cut Transformer NCT-Z
The core, coil, shield, case, and even the lead wires have all been manufactured in strict adherence to the theory.
This product has been developed through efforts since 1960, revealing the theoretically most superior design and obtaining patents for its structure and manufacturing methods. It has been made commercially available by improving the manufacturing methods and materials. The core shape and coil arrangement are of an off-axis eccentric twist design, exhibiting outstanding performance from several kHz to GHz. It is primarily used in laboratories, space development, laser-related equipment, precision experimental instruments, and for measuring minute signals.
- Company：電研精機研究所
- Price：Other
Noise Cut Transformer NCT-R5-J2
Troubles that cannot be solved with noise filters or shielded transformers!
This is a product designed with safety and ease of use in mind. Not only are the conductive parts such as terminals and coils shielded, but the core part is also enclosed in a case to prevent contact, ensuring greater safety than before.
- Company：電研精機研究所
- Price：Other
Noise Cut Transformer NCT-R3-U1 (UL Compliant Product)
A small capacity model that has obtained certification for the insulation material UL standard "UL1446" and the structural UL standards "UL5085-1, UL5085-2."
- It is UL certified (certified for UL1446, UL5085-1, and UL5085-2). - It has a very high versatility and can be used in a wide range of applications. - With its high noise suppression performance, it can withstand induced lightning surges up to 5000V. - It can reduce the need for other noise prevention components. - It has a structure that is not affected by radiated noise. - Both the primary and secondary sides are cable-connected.
- Company：電研精機研究所
- Price：Other
Noise Cut Transformer NCT-R3-J6
The latest three-phase model that improves noise reduction performance while considering safety and ease of use.
The "Noise Cut Transformer" has improved noise attenuation performance, safety, and ease of use. It is a disturbance wave blocking transformer. Focusing on the fact that various noise disturbances are caused in different environments by high-frequency noise below 150 kHz, which is not covered by major EMC standards such as the IEC 61000-4 series, we have generally enhanced the noise attenuation performance, particularly in the range of several tens to several hundred kHz. Additionally, not only the conductive parts such as terminals and coils but also the core part is enclosed in a case to prevent contact, making it safer to use.
- Company：電研精機研究所
- Price：Other
Noise Cut Transformer NCT-I2
It is a model with a receptacle for the outlet.
This is a small, low-cost "Noise Cut Transformer" developed with a focus on general-purpose electronic devices for mass production and portable electronic devices. By utilizing a newly developed noise prevention mechanism (which has been patented), it effectively blocks normal mode noise across a wide frequency range that cannot be prevented by standard isolation transformers or shielded transformers, thereby significantly improving the noise resistance of the connected devices, all at a low price. Additionally, its wide-band common mode noise blocking capability protects the load devices from surges caused by induced lightning. In addition to standard voltage models, we can also produce units at your desired voltage through made-to-order production, allowing for replacement of the power transformer in the connected devices. Furthermore, it can eliminate the need for other noise prevention components such as power filters.
- Company：電研精機研究所
- Price：Other
Noise Cut Transformer NCT-I1
Low price, standard type / Ideal for equipment integration.
This is a small, low-cost "Noise Cut Transformer" developed with a focus on general-purpose electronic devices for mass production and portable electronic devices. By utilizing a newly developed noise prevention mechanism (which has been patented), it effectively blocks normal mode noise across a wide frequency range that cannot be prevented by conventional isolation transformers or shielded transformers, thereby significantly improving the noise resistance of the connected devices, all at a low cost. Additionally, its wide-band common mode noise blocking capability protects the load devices from surges caused by induced lightning. In addition to standard voltage models, we can also produce units at your desired voltage through made-to-order production, allowing for replacement of the power transformer in the connected devices. Furthermore, it can eliminate the need for other noise prevention components such as power filters.
- Company：電研精機研究所
- Price：Other
Noise Cut Transformer NCT-I4
It is reassuring, especially when a lightning surge is expected.
This is a small, low-cost "Noise Cut Transformer" developed with a focus on general-purpose electronic devices for mass production and portable electronic devices. By utilizing a newly developed noise prevention mechanism (which has been patented), it effectively blocks normal mode noise across a wide frequency range that cannot be prevented by standard isolation transformers or shielded transformers, thereby significantly improving the noise resistance of the connected devices, all at a low cost. Additionally, its wideband common mode noise blocking capability protects load devices from surges caused by induced lightning. In addition to standard voltage products, we can also produce units with custom voltages upon request, allowing for replacement of the power transformer in connected devices. Furthermore, it can eliminate the need for other noise prevention components such as power filters.
- Company：電研精機研究所
- Price：Other
Noise Cut Transformer NCT-I3
It is a low-cost model equipped with basic performance. It is very convenient when connecting loads such as measuring instruments and audio equipment via a plug.
This is a small, low-cost "Noise Cut Transformer" developed with a focus on general-purpose electronic devices for mass production and portable electronic devices. By utilizing a newly developed noise prevention mechanism (which has been patented), it effectively blocks normal mode noise across a wide frequency range that cannot be prevented by standard isolation transformers or shielded transformers, thereby significantly improving the noise resistance of the connected devices. Additionally, its wideband common mode noise blocking capability protects the load devices from surges caused by induced lightning. In addition to standard voltage models, we can also produce units with custom voltages upon request, allowing for replacement of the power transformer in the connected devices. Furthermore, it can eliminate the need for other noise prevention components such as power filters.
- Company：電研精機研究所
- Price：Other
